Time to read: 4 min

Inspiration

It all started back in 1995, when I listened to the song Da Funk by Daft Punk. As a European, I had a lot of exposure to Daft Punk music, and after Discovery (2001), it became shall we say…an obsession. 🙂

I stumbled upon this YouTube video on how to make a Daft Punk helmet a while back, bought all the materials, but sadly never got around to making it.

…and then I joined Fictiv! With easy access to 3D printers, of course the first thing I wanted to print was (surprise, surprise) the helmet of Thomas Bangalter.

Here’s how I did it.

Step 1: Digital files

I downloaded my files from thingiverse. I used the v1.5 version, and I’d say it might actually be a bit too big, especially in the jaw area. That said, the size offered me more space to install the battery case.

Step 2: 3D printing

I printed all the files on a Makerbot Replicator 2, and in order to ensure smooth part surfaces, I chose to orient them standing. This meant more printing time and less sanding time.

Printed parts of a DIY Daft Punk helmet
‍<em>Printed parts of the helmet dome<em>

Step 3: Welding rehearsal

In order to see what the helmet would look like (and because I was too excited to wait for the welding step), I put all the parts together with zip ties, marking the different parts with a Sharpie + tape.

Daft Punk helmet mockup with 3D printed parts, Sharpie, and tape
<em>Daft Punk helmet mockup with printed parts and tape<em>

Step 4: Actual welding

I decided to weld the parts and not use screws as the original design suggests. My reasoning was that welding would allow me to have a smoother and sturdier helmet with no extra weight.

Because I had very limited experience with welding, I decided to first weld the dome of the helmet, which was the easiest, using a soldering iron at 300 degrees Fahrenheit.

The welded dome of a Daft Punk helmet
‍<em>Welded dome of the helmet<em>

After that, I went ahead and welded the rest of the helmet.

smoothing Daft Punk helmet seams with a soldering iron
‍<em>Using the soldering iron to smooth the seams<em>
Welding Daft Punk helmet parts
‍<em>Welding parts<em>

Step 5: Mid-project selfie

Fictiv team members
‍<em>What a bunch of nerds<em>

Step 6: Surface finishing

In order to give the helmet a smooth texture, I used XTC 3D epoxy resin.

Instructions come on every bottle, and it’s easy to use. Just be sure to use a mask when mixing, as the 2 mixed materials start reacting immediately and produce fumes.

Surface finishing materials for Daft Punk helmet
Surface finishing a Daft Punk helmet
Daft Punk helmet coated with surface finish

After the XTC-3D dried, I initially used sand paper, but the XTC-3D was too hard, so I decided to use a dremel to get rid of the biggest bumps.

Smoothing the Daft Punk helmet's surface with a dremel
‍<em>Using a dremel to sand down the XTC 3D and other surfaces<em>

Step 7: Applying primer

After sanding down the helmet, I applied a gray spray-painted primer.

Daft Punk helmet spray-painted gray
‍After primer

Step 8: Applying bondo

After the primer, I used a simple bondo you can find in any color shop.

Instructions are on the can and pretty straightforward.

Applying bondo to Daft Punk helmet
‍<em>Nate applying the bondo this was a team effort<em>

Step 9: Drying the bondo

In order to save time, I put the helmet with the wet bondo in front of a fan. Waiting time: 30min.

Drying the Daft Punk helmet with a fan

Step 10: Sanding like there’s no tomorrow

Mask and safety glasses needed.

Patience absolutely needed.

Time of sanding: 3 hours.

Sandpaper used: Fandeli Grit 100.

Beer used: Ballast Point Sculpin.

Sanding the Daft Punk helmet
<em>Sanding the helmet<em>

Step 11: More primer

After hours of sanding, I applied another coat of the primer.

Daft Punk helmet with second coat of gray primer
‍<em>After second coat of primer<em>

Step 12: Add foam for head protection

The trick here is to check in front of the mirror how much and what thickness foam you need for each side. This will determine where the helmet sits on your head, so it’s very important.

Glue gun used: Surebonder. You only need 5-6 points of glue per foam part.

Adding foam to the Daft Punk helmet
<em>Adding foam to the helmet for head protection<em>

Step 13: Adding EL Wire

Time to glue EL WIRE on the helmet to add some WOW effect at night (while listening to Daft Punk, of course).

This is the EL WIRE I used. I chose this particular one since I wanted short wires (5 ft each), multiple colors, and only one battery case.

I only put a drop of glue every couple of inches here, so not much needed.

Adding EL WIRE to the Daft Punk helmet
<em>Adding EL WIRE to the Daft Punk helmet<em>

Step 14: Add Daft Punk pyramid logo

After Daft Punk’s 2006/2007 tour, the pyramid light scheme became a trademark of that era for the band, so I had to include it.

Adding Daft Punk's pyramid light scheme image to the helmet
<em>Adding a pyramid symbol to the helmet<em>

Finished helmet

Here it is!

Daft Punk helmet
<em>Completed Daft Punk helmet<em>

And here it is in the dark.

Lessons learned

This was a learning process for me, and there are a few things I’d do differently the second time around:

  1. Don’t use XTC 3D on some parts (the dome, in this case). It will create a bump all around the finished part (the base of the dome, in this case) which will have to be sanded later.
  2. When welding, estimate the parts dimensions. Some bars could help.
  3. When I was gluing all the black parts of the EL WIRE inside the chin of the helmet, the white EL WIRE cable was cut, due to the tension the glue gun created. Don’t do this.

Now, go listen to some Daft Punk!