Sign in Get Instant Quote

3D Printing Services

Selective Laser Sintering (SLS)

At a glance

Lifecycle

Functional testing, low to mid volume prototyping (10s - 100s)

Lead Time

3 days

Resolution

0.1 mm

Infill

100% (solid)

Materials

Nylon, Nylon 12 Flame Retardant, TPU 88A

3D Printing Materials

Nylon

Nylon 12 Flame Retardant

TPU 88A

Nylon

Multi Jet Fusion (MJF) Nylon is a synthetic 3D printed polymer material that’s strong, durable, and flexible. MJF Nylon is typically considered more often for end-use parts and functional testing under higher loads. MJF Nylon is a cost-effective option for higher bridge production quantities because of the machine’s modular design and faster production speed. Nylons offered: Nylon 11, Nylon 12, and Nylon 12 Glass-Filled
Processes:
Selective Laser Sintering (SLS)
Multi Jet Fusion (MJF)
Colors:
(Selective Laser Sintering (SLS)) White, Black
(Multi Jet Fusion (MJF)) Grey, Black
Resolution:
(Selective Laser Sintering (SLS)) 0.1 mm
(Multi Jet Fusion (MJF)) 0.08mm
Infill:
(Selective Laser Sintering (SLS)) 100% (solid)
(Multi Jet Fusion (MJF))
Max Print Size:
(Selective Laser Sintering (SLS)) 700 x 380 x 580 mm
(Multi Jet Fusion (MJF)) 380 x 284 x 380 mm
MJF nylon thumbnail

Design Recommendations

Max Part Size [x, y, z]

340 x 340 x 600 mm (P390) or 700 x 380 x 580 mm (P760)

Gaps for Mating Parts

0.5 mm clearance between features

Tolerance

+/- (0.25 mm + 0.002mm/mm)

Min Wall Thickness

1.0 mm for production, 1.5 mm for consistent measurement or mechanical properties
  • For long, thin parts: use ribbing to mitigate warping risks.

Cost Saving Tip

If using 3D printing for higher part quantity fabrication (20+), SLS will be the most cost effective additive manufacturing process.

About the Process

Selective Laser Sintering uses high-powered lasers to sinter powdered material, binding it together to create a solid structure. It is often confused with another similar process called Selective Laser Melting (SLM), the difference being that it only sinters the powders together as opposed to achieving a full melt.

Parts are supported by unsintered powder in each layer, which remain spread across the build volume until each layer is fused together. Once complete, the part is removed from the remaining powder and cleaned by hand and using water/air jets.

While parts created using this technology can contain some metal, they are usually plastic composites that present a good strength to weight ratio and can be acquired relatively cheaply. For parts that must be structurally as sound as forged solid metal, DMLS is required. Still, the high level of accuracy, relatively cheap feedstock, and high temperatures achievable with SLS printing make it an incredibly useful technology with a broad range of applications ranging from architectural models to control surfaces of aircraft and surgical tools.

YOU MIGHT ALSO BE INTERESTED IN

Living Hinge Design: How to Design a Living Hinge

A living hinge is a thin, flexible strip made from the same material as the connected parts, designed to let them bend or rotate without additional hardware. They are low-cost, easy to manufacture, and have little wear or friction involved in operation. But while the idea is simple, the execution can be more complicated. Living […]

Learn More

First Article Inspection (FAI): The Guide for Engineers and Manufacturers

In manufacturing, quality control is engineered and measured. Before production launch, you need proof that your design can be built repeatedly as intended. That data comes from a verification process called First Article Inspection (FAI). During product development, engineers put considerable effort into ensuring the design is near perfect—from dialing in dimensions and tolerances to […]

Learn More

Also of Interest